Tel:+86 371 66399397

English

Russian

PRODUCTS LIST

Diesel Forklift
Electric Forklift
LPG & gasoline
CNG / LPG
Rough Terrain Forklift
Pallet stacker
Side Loader Forklift
Towing Tractor
Forklift Attachements
Forklift spare parts

What should be paid attention to when cargo pallets are used in conjunction with forklift racks in warehouses?

Date: 2019-04-27 View:

 What should be paid attention to when cargo pallets are used in conjunction with forklift racks in warehouses?

Forklifts, shelves and cargo pallets are the iron triangle combination of warehouse storage, and they are indispensable in warehouse management.

Operational or levelling problems of the forklift driver will inevitably cause damage to the guardrails, supports and pallets due to scraping off the plastic powder and hitting the heavy duty racks.



How to choose and configure the racks, internal combustion forklifts and electric forklifts?

Protective sleeves are installed on the legs or guardrails, but this method can reduce the damage of internal combustion forklifts and electric forklifts to cargo pallets and shelves, but the technical level provided to the driver is not high, making it difficult for managers to judge the operation of the forklift driver level.

When planning the warehouse, the rack manufacturer can be required to appropriately increase the width of the feeding rack channel, and reserve a certain safety distance for the driver in advance to reduce the impact of the forklift on the bracket.

The fork gear sleeve is installed on the internal combustion forklift and electric forklift, which can effectively reduce the damage of the internal combustion forklift and the electric forklift to the edge position and middle corner of the cargo pallet, but this method is particularly feasible, and has passed the internal combustion forklift and electric forklift manufacturers. safety test.

Draw a visual slowdown line on the passage floor in place of the slowdown sign.

Many times, experienced drivers will drive faster, resulting in some distance between the measured gap and the actual gap.

Therefore, a simple slowdown sign may not have an obvious effect.

In fact, in addition to the above four points, how can the use of cargo pallets reduce the collision problem of internal combustion forklifts and electric forklifts on driving racks?

The most important thing is to ask managers to strengthen pre-employment training before forklift drivers enter the service on the one hand, and improve the safety awareness of drivers. In addition, after the driver enters the service, the assessment of the forklift driver will be strengthened.

As forklift drivers, we also need to continuously improve our technical level and safety awareness, so as to fundamentally avoid collision problems.